ZAR MINI - SERIE RIB

Our ZAR miniTM RIB line has different sizes and versions. All boats can be equipped with a bow locker (“L”) and a flat double flooring (“D”). All boats starting from RIB11 have a bow locker and from RIB 12 a double flooring and a bow locker as standard features. Below these sizes (RIB8,9 & 10) you can choose what you need.
As optional equipment there are steering consoles and double seating (starting from RIB9 and only with double floor). You can also choose from a variety of sunroofs, bilge pumps, cushions and many more things. Please ask your ZAR miniTM dealer. He can serve you best.
The ZAR miniTM RIB line can easily pull water toys, waterski (from25hp) and tubes with the two installed D-rings on the transom.
Every ZAR miniTM has three lifting Davit lifting points. One in the bow and two on the transom. If your ZAR miniTM has a bow locker, you will have four lifting points.
Due to the very light aluminum hull it can go very fast and plan easily with a smaller engine. The hull will not face any problems of Osmoses or gel coat defects like a fiberglass hull. It will also last longer and not become heavier during use. The aluminum hull is being specially manufactured and powder coated to resist corrosion and saltwater. You will have a lot of fun with your ZAR miniTM RIB.
All RIB inflatables from ZAR miniTM until RIB14 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.050g/m2 and a thickness of 0.9mm.
All RIB inflatables from ZAR miniTM starting from RIB15 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.500g/m2  and a thickness of 1.2mm.
All ZAR miniTM RIB inflatables are also available in CSM (formally known as HypalonTM from DuPontTM) with a special design. Please ask your ZAR miniTM dealer, for further details. CSM lasts much longer than PVC and is more resistant toward UV light, acid, alkalis, saltwater, heat and cold. We use HypatexTM that is one on the best material on the world market today. It has been manufactured since 60 years.
All PVC seems of our ZAR miniTM tube chambers are welded*. All boats feature an overpressure valve, as standard equipment, that will protect your tube when inflated properly. High quality material’s paired with constant research & development are the key to success.
Every single ZAR miniTM inflatable boat passes a very strict quality control, before we deliver it to our valued customers. Just in case a mistake passes the quality control, you will be protected by our limited 2 years warranty after registering your boat with us.
With our large standard equipment and our modern Italian Design, the ZAR miniTM inflatables are one of a kind. Starting from RIB13 you will have an extra wide bow.
For all kind of watersport you can find your matching ZAR miniTM RIB. Waterskiing, cruising, SCUBA diving, fishing or as a tender to your yacht. ZAR miniTM RIB is able to satisfy your expectations.